FTIR Analyzers

BHB provides a wide range of gas analyzers using different analysis modules according to the sample characteristics and the applications intended.

The FTIR Gas Analyzer ACF-NT combines in one equipment the possibility of measuring up to 35 components using a single sample.

Associating the zirconium analyzer and the flame ionizer the potentialities of a high resolution potentiometer this analyzer is usually provided in a Continuous Emissions Monitoring System
(CEMS) or in a Process Analysis integrated solution.

MEASURING PRINCIPLE:

• High resolution infrared spectrometer (FTIR) that uses the Fourier transform for the IR absorbent gas;
• Zirconium Oxide Analyzer for oxygen;
• Flame ionization for the unburned hydrocarbons.

COMMON APPLICATIONS:

• Hazardous Waste Incinerator;
• Cement Plants;
• Lime Kilns;
• Thermal Treatment of Contaminated Soils;
• Solvent Recovery and Treatment;
• Power Plants;
• Combustion of Coal, Oil, Waste and Sludge;
• DeNox and DeSOx plants;
• Iron or Steel smelters; 
• Brick, tiles and glass manufacturing.

EXAMPLES OF THE COMPONENTS AND THEIR SMALLEST MEASUREMENT RANGE:

• SO₂ 0…75 mg/m³ and 0…25 ppm;
• NO 0…200 mg/m³ and 0…150 ppm;
• NO₂ 0…40 mg/m³ and 0…20 ppm;
• CH₄ 0…100 mg/m³ and 0…150 ppm;
• N₂O 0…50 mg/m³ and 0…25 ppm;
• NH₃ 0…15 mg/m³ and 0…20 ppm;
• HCl 0…15 mg/m³ and 0…10 ppm;
• HF 0…5 mg/m³ and 0…5 ppm;
• CO 0…75 mg/m³ and 0…60 ppm;
• H₂CO 0…20 mg/m³ and 0…15 ppm;
• CH₃OH 0…40 mg/m³ and 0…30 ppm;
• H₂O 0…40 Vol-%;
• CO₂ 0…30 Vol-%;
• VOC 0…15 mg/m³;
• O₂ 0…25 Vol-%.

CALIBRATION:

• Zero and span calibration obtained by using zero gas only;
• Oxygen sensor and FID calibration using standard gas.

  Downloads

				Brochure
				Datasheet